A while ago, I made a coin wallet. But since I like my paper money much more (read “I like to have it much more”), I thought it deserved a nice wallet too. This one too is very easy, you just need to be able to stitch straight…
What you will be needing:
- Rectangle of 16,5 x 20 cm(part A)
- Rectangle of 6 x 20 cm(part B)
- Rectangle of 5,5 x 20 cm (part C, optional – if you want to have two extra pouches for your cards)
(see template (1))
- Stitch 0,5 cm hems on the longest sides of parts A and B. Since the lower side of part C won’t be visible, you only need to stitch a 0,5 cm hem on the topside.
- Fold part A double, wrong sides facing. Crease it so the folding line remains (see red line on template (2)).
- Unfold, place part C around 1 cm above the folding line and stitch its lower side. Next place part B along the folding line and again stitch the lower side. Use tape, paperclips or hairpins to keep the parts in place (read ‘Don’t use pins’ at the tips & tricks-page).
- Stitch the folding line of the wallet itself, see blue line on the template. It is a good idea to draw a helpline on the middle of the wrong side of part A.
- Fold part A again, this time right sides facing. Stitch the sides together on 0,5 cm.
- Turn the wallet right side out. To make this more easy, you could cut the hems smaller, but be careful when doing so! Using a blunt object to push out the corners is also recommended.
The wallet won’t take the right shape immediately, so I placed it under a pile of (heavy) books for a day.
A few days ago, I made a little all-purpose-case. I have to admit I am not that happy with the result: I worked sloppy, messed it up in the corners and my wire tension wasn’t very good either which I tried to fix, but then made it worse. It was not my day as you might see 😉 BUT, at least the color combination is lovely, isn’t it…
What you will be needing
- 2 pieces of oilcloth (size A4) – inner and outer part
- 2 U-shaped parts (8 x 4 cm) – sides
- transparent tissue (7,5 x 3,5 cm) – name tag
- Velcro or button – closing
- Bias tape
I started with some preliminary work at the biggest pieces. First, I stitched one Velcro on the bottom of the outer part and the other Velcro on the top of the inner part. On the inner part, I also stitched a name-tag underneath the Velcro. To make it easier to put everything together in later steps, I stitched both parts together on 1 mm, wrong sides facing. Next I sewed bias tape on the top of the two U-shaped parts. Finally, I stitched all parts together, using bias binder foot. This is the part where I messed it up so I will let you fiddle a little bit by yourself from here 😉 …
I don’t know yet for which purpose I will use the case but I am considering pencil case or makeup case.
A while ago I bought three little cactus plants in IKEA. Although I like the white flowerpots they are in, I thought my cactuses deserved to be brightened up a bit. Inspired by spiegelstiksels I made three little plant baskets.
You can find the template I used here. Spiegelstiksels described the dimensions you need very clear. Side A is half the width of the pot, side B the height and sides C are the width divided by 8. Don’t forget to add the seams! For one basket you will need to draw the pattern two times. Since oilcloth is a solid tissue, I drew the pattern directly on the oilcloth.
Cut out and put wrong sides facing. Now stitch the outer seams (B and D), following the dashed lines. Then fold to stitch the corners. Turn inside out and done! Since I will be using this basket as flowerpot, I didn’t use lining.
When it’s raining, I like to play games inside. I prefer card games like Uno or Skipbo. If you have played these games with kids, you know they often struggle to hold all cards in their hands or to hide them from the other players. If you have small hands yourself, you might know this problem too ;). That’s how I came up with the idea to make this playing card holder…
- You start by cutting all different parts, shown in these instructions. You can softly draw the dashed lines on the tissue, this is where the stitches will come.
- Then you apply all pieces to the front part: stitch the Velcro on the bottom and the 3 strips on lines A, B and C. On the beforehand I stitched a bias on top of these strips.
- On the back part, you only need to stitch Velcro on the topside.
- When all pieces are applied, take the front and back and put them wrong sides facing. I secured both parts to each other using paperclips. Now you can stitch it together by sewing over lines C, D and E.
- Next, sew the bias starting in the lower right corner. Follow the direction of the red arrow in the instructions. Stop at the upper right corner, needle in your tissue.
- Now you can estimate the size of the cardboard, which I used for strengthening. This depends namely on how precise you worked. Take the dimensions between your stiches minus around 0,50 cm. Cut out the cardboard and shove it between the two parts.
- To finish, you continue stitching the bias.
Since you can fold the holder, it doesn’t take too much space
One of my colleagues became auntie last week. It’s the first baby in the family so she was veeery happy. We thought that a home-made Lola bib would be the perfect present for little Fons.
I looked on Pinterest for a pattern I liked, you can find it on this board. Since I had too many ideas for the design, I thought it would be nice to make a two-sided bib.
On one side I used Go with the flow Curaçao and added a cute whale to it. The whale had many little corners so I merely used the handwheel to stitch it on the bib. I stitched the Velcro in the top left hand corner. Make sure you stitch it firmly as it will be pulled a lot.
For the other side I used Spoons Original and added a little bow tie in matching colors. I first stitched the hourglass-shaped part, leaving the sides open. Then, I stitched the middle part on top of it. Don’t stitch the bow tie too close to the border (like I did, oops!) or it will overlap with the bias. Here too you need to stitch the Velcro in the top left hand corner. Finally, I stitched the two layers together with the help of a bias binder foot.
Next week my colleague will visit the little man. I hope the bib will fit. Photos will follow…
Because it seems like we’ll have to wait a little longer for the sun (sad face), there is more time to sew summer gadgets (happy face). Already to many of my sunglasses got damaged because I put them loose in my purse, that’s why I made this practical sunglasses case.
The case I will be making has two layers, oilcloth on the outside and soft tissue on the inside. You won’t need much fabric, so you can use leftovers for this project. Cut the two pieces out using this template. (why do I always have to think about pizza when I see it ?!) Feel free to enlarge it or make it more oval. I used diameter 19,5 cm. When drawing the second piece, make sure to mirror the pattern!
Once cut out, place the two pieces on each other, wrong sides facing. You stitch the parts together using a bias tape. A bias binder foot might be very useful doing so! Start at the beginning of the arrow (see template) and continue in this direction. Once you have passed the dashed line a few centimeters, fold the circle in two, that the borders overlap. Now continue to sew until the end. Reinforce the last stitches and cut of the bias.
No more scratched sunglasses from now on!
Since you don’t change bike every now and then, I love to add cute accessories to cheer it up. I already made a basket and bags. Now I made a bike seat cover.
What you will be needing
- Strip of oilcloth, 9 by 100 cm
- Saddleshaped piece of oilcloth
- Elastic, 1,5 cm wide and 1 m long
You start with stitching the elastic on the border of the long strip its back. Make sure you put enough pressure on the elastic, otherwise the bikecap will be too loose.
Then you have to stitch the strip on the saddlepiece, wrong sides facing. Start in the middle of the back of the seat. Don’t stitch the first centimeters of the strip yet. Try not to stitch too fast, in order to be able to follow the shape better.
When you are at the end, cut the rest of the strip, leaving again a few centimeters. Once you have stitched the ends of the strip together, your bikecap is ready!
This cap will help you find your bike back in the bike rack more easy and prevent your saddle form getting wet…